OPTIFLUX 5300 Elektromanyetik Akış Ölçer - KROHNE

OPTIFLUX 5300

Electromagnetic flowmeter for advanced process and master meter applications

Highest accuracy (±0.15%), with ceramic tube for aggressive and abrasive liquids (≤70% solid content) up to +180°C / +356°F

CT: OIML R117, MI-005 etc.

Flange: DN15…300 / ½…12", max. PN40 / ASME Cl 300; Sandwich: DN2.5...100 / ⅒...4"

3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET

Read more
Out-of-Stock
Reference:
Brand:
Description

The OPTIFLUX 5300 is an electromagnetic flowmeter (EMF) with a high-tech ceramic measuring tube for very aggressive and abrasive fluids, even with high solid content (up to 70%). The high-end EMF is particularly suited for process applications in the chemical processing industry and the minerals and mining sector. Due to its FDA and EC1935/2004 compliant sensor material, the OPTIFLUX 5300 can also be used for hygienic applications. With a measuring uncertainty of just ±0.15% of measured value (±1 mm/s) it is one of the most accurate electromagnetic flowmeters available in the market. That is why leading metrological institutes use the OPTIFLUX 5300 as their master meter.

Thanks to the unique combination of material properties such as surface hardness and finish, mechanical resistance to corrosion and temperature shock, the OPTIFLUX 5300 outclasses all traditionally lined EMFs. Its patented virtual reference option allows a cost-saving measuring mode without additional grounding rings. The flowmeter comes with flange or as flangeless and space-saving wafer version. Both versions are vacuum-resistant and comply with the Pressure Equipment Directive. The OPTIFLUX 5300 is also approved for use in hazardous areas. It offers various digital communication options. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.

Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)

One of the most accurate EMFs in the market: Only ±0.15% / ±1 mm/s error of measured value (MV)

Transfer standard of international metrological authorities

Available with patented virtual reference grounding method: no grounding rings needed

Withstands most aggressive and abrasive fluids

Extensive flowmeter and process diagnostics (incl. NE 107)

Fully vacuum-resistant with high-tech ceramic sensor material

Fused in-place cermet or platinum electrodes



Typical Applications

General

Extremely demanding applications with clean, aggressive or abrasive liquids

Fiscal metering (custody transfer)

Applications requiring an EMF with an extremely high rate of accuracy

For low conductive media (>1 μS/cm)

Applications with solid content up to 70%

Chemical and other process industries

Extremely precise volumetric dosing of additives

Chemical injection

Inorganic and organic mass production

Processing of corrosive and aggressive chemicals (acids, alkaline media)

Minerals and mining industry

Inhomogeneous and abrasive slurries with fine particles (solids content)

Hydrocyclone feed lines

Food and beverage industry; pharmaceutical industry

Blending, dosing, batching of conductive liquids

SIP/CIP applications

Wastewater industry

Sediment slurries and sludges

Dosing of coagulants and flocculants

Pulp and paper industry

Chemically aggressive fibrous products

Others

Master meter applications in calibration facilities

First EMF with ceramic measuring tube to comply with the Pressure Equipment Directive

Resistance to corrosion and temperature shocks

Available as flange or sandwich (wafer) version

No moving parts, no wear, no pressure loss

On-site verification of flowmeter with OPTICHECK service tool

Read more
Product Details
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Close
Click for more products.
No produts were found.

Homepage

WhatsApp

Menu